Bolt Cutters Can Be Installed As An Electrician

Ordinary bolt cutters, also known as diagonal pliers, are specially designed for cutting thick metal wires, wires and cables.

The clamp handles of ordinary bolt cutters have three types: iron handle, pipe handle and insulating handle. Among them, the shape of the insulated handle bolt cutters used by electricians, and the withstand voltage of the insulated handle is 500V.

Ordinary bolt cutters can be used as an electrician to cut the remaining wire during installation, and can also be used as a cutting tool in the field of weak current. Its characteristic is that the head is oblique and the tip is small. It is most suitable for cutting the very thin wires and vinyl wires on the incision after resin molding, precision instruments, etc., and cutting the excessively long pins of the components on the circuit board. Not only that, but sometimes it can also be used for disassembly and assembly.

For materials of different thickness and hardness, diagonal pliers of appropriate size should be selected. When cutting wires or component pins with diagonal pliers, the end of the wire should be pointed downward to prevent the operator's eyes or other people from being injured when the wire is broken. Ordinary bolt cutters cannot be used to cut iron wires or other metal objects to avoid damage to the device port. Wires exceeding 1.6mm cannot be cut with diagonal pliers.