Carbon Steel Combination Wrench

Model Number: HM1901A

Size: 6mm~55mm

Brand: HOMAR or Customized

Material: Carbon Steel Or CRV

Precautions

Wrench types and specifications are many, although there are open wrenches, plum wrenches, active wrenches, socket wrenches, torque wrenches and so on. However, the method of use is much the same as the precautions.

1. No matter what kind of wrench. The best use effect is to pull if it must be pushed. You can only push it with the palm of your hand, and your fingers should be stretched out to prevent bolts or nuts from suddenly loosening and hurting your fingers. To get the most torque. The direction of the pull must be at a right angle to the wrench handle.

2. When using a live wrench. The specifications should be selected according to the size of the nut. When used, the right hand handle. The closer the hand is, the less effort it pulls. When pulling the large nut, use a large torque and hold your hand close to the end of the handle. When you pull the small nut. The torque required is small, but the nut is too small and easy to slip. Therefore, the hand should be held close to the head. And can adjust the worm wheel at any time, tighten the lip, prevent slipping.

3. When using an active wrench. The wrench's active jaws should be subjected to thrust and fixed jaws and pull, That is, when you pull a wrench. Active jaws face the inside: force must be uniform, so as not to damage the wrench or bolt, nut angle deformation. An accident occurred as a result of slipping.

Hot Tags: carbon steel combination wrench, China carbon steel combination wrench manufacturers, suppliers, ,